Why Is NBT15 Tugger So Popular
The NBT15 tugger is popular due to its 3,400-pound capacity, 8-hour battery life, and 15% slope handling. Its 500W motor boosts efficiency, while solid rubber tires last 25% longer. The automatic braking system reduces failure rates by 15%, ensuring safety and reliability in high-load environments.
Compact Yet Powerful
The dimensions of NBT15 are 1102×480×1132 mm, with a net weight of 85 kg. The maximum load capacity of NBT15 is 3400 pounds (about 1542 kg). In the manufacturing or logistics industry, many equipment and raw materials weigh more than 1000 kg. NBT15 can meet the handling needs of these heavy items.
NBT15 has an adjustable speed function with a speed range of 0-5km/h. NBT15 is also equipped with slow and fast mode selection buttons. NBT15 is equipped with an automatic braking system. After the introduction of the automatic braking function, the equipment failure rate has been reduced by about 15%. NBT15 is equipped with a 32Ah lithium battery, which can provide about 8 hours of continuous use time after being fully charged.
NBT15 uses anti-skid and anti-puncture solid rubber tires. Solid rubber tires have a service life of about 25% longer than ordinary pneumatic tires. The NBT15 electric tugger is also equipped with a 500W electric motor. The maximum slope load capacity of NBT15 is 15%.
Easy to Operate
The 32Ah lithium battery of NBT15 can support at least 8 hours of continuous work, and the lithium battery of NBT15 can be fully charged in just 3-4 hours. NBT15 can carry up to 3400 pounds (about 1542 kg).
Compared with traditional pneumatic tires, solid rubber tires are 25% more durable. NBT15's 500W electric motor provides sufficient power support.
NBT15 has a maximum slope load capacity of 15%. Whether transporting items on a slope or moving equipment in a warehouse with a large slope, NBT15 can maintain efficient working performance.
NBT15 is also equipped with an electronic braking system, which can control the intensity and response time of the brakes by sensing the operator's operation.
NBT15 also has low maintenance costs. Its battery life is 30%-40% longer than traditional lead-acid batteries. The long battery life enables the equipment to provide long-term stable service and reduce downtime and maintenance costs caused by battery failure.
Energy-Efficient Design
The NBT15 electric tugger uses a high-efficiency electric system, which is designed with maximum energy efficiency in mind, allowing the equipment to consume less energy during operation. The battery uses a 32Ah lithium battery, which provides about 30%-40% more power output than lead-acid batteries. The NBT15 can reduce power consumption by about 25% compared to equipment using lead-acid batteries.
The fast charging technology of lithium batteries allows the NBT15 to be charged in only 3-4 hours, which greatly improves the working efficiency and available time of the equipment compared to the 8-10 hour charging cycle of traditional equipment.
In addition, the NBT15's 500W electric motor can continuously provide strong power under maximum load and provide continuous power support. This optimized design improves the overall energy efficiency of the equipment by about 15%.
The NBT15 also has an intelligent energy recovery system. Through this system, the NBT15 can effectively recover about 10%-15% of the electrical energy.
It is worth noting that the battery management system (BMS) of the NBT15 ensures that the battery's energy use is always in the best state by monitoring the battery's charging and discharging status in real time. It can intelligently identify the remaining power and health status of the battery, avoid over-discharging or over-charging, and thus improve the battery life and stability. It has been verified that the cycle life of NBT15's lithium battery can reach more than 2,000 times, while traditional lead-acid batteries usually only have a cycle life of about 500 times, which makes NBT15's battery more economical and sustainable.
Durable and Reliable
The chassis of the NBT15 is able to maintain structural stability when carrying a maximum load of 3,400 pounds (about 1,542 kilograms), and the tugger can provide continuous support whether on flat ground or in a slightly sloped environment. Compared with other similar equipment, the steel chassis of the NBT15 is 25% stronger than standard materials.
The solid rubber tires of the NBT15 excel in wear and impact resistance. Solid rubber tires have high puncture resistance. The tire life of the NBT15 is about 25% longer than that of ordinary pneumatic tires.
The NBT15 uses a 32Ah lithium battery with a cycle life of more than 2,000 times, which is much higher than the 500 times of traditional lead-acid batteries. The lithium battery charging time is about 3-4 hours, which is nearly half the charging time of lead-acid batteries.
The NBT15 is equipped with a 500W electric motor. The motor of the NBT15 has higher power density and efficiency, and can still operate stably under high load. The stability of the electric motor of the NBT15 is improved by about 15% when it works for a long time at high load.
The NBT15's automatic braking system and electronic control system also increase the overall durability of the equipment. The braking system can be automatically activated when needed, avoiding damage to the braking system caused by improper human operation. The electronic control system intelligently adjusts the working mode and power output of the tugger to ensure that the equipment always maintains the best working condition. Through this intelligent design, the system failure rate of NBT15 is greatly reduced, and the probability of failure during long-term operation is about 20% lower than the industry average.
The housing of the equipment uses a corrosion-resistant coating, which can effectively prevent rust or damage when exposed to humid or corrosive environments for a long time. In actual environmental tests, the NBT15 performed stably in high humidity or highly corrosive climates, and there was no obvious wear or corrosion on the surface of the housing.
Affordable Maintenance Costs
The lithium battery used in the equipment has obvious cost advantages over traditional lead-acid batteries. The service life of lithium batteries is up to 2,000 cycles, while lead-acid batteries can usually only withstand 500 cycles. The NBT15 has a significantly lower battery replacement frequency than similar products using lead-acid batteries.
The fast charging technology of lithium batteries makes the charging process more efficient than traditional batteries, and the charging time only takes 3-4 hours, while traditional lead-acid batteries may take 8-10 hours.
The solid rubber tires of NBT15 have higher wear resistance and puncture resistance, and the tire service life of NBT15 is about 25% longer than that of ordinary tires. The test results of NBT15's 500W electric motor under high load are as high as 85%.
The failure rate of NBT15 is much lower than that of traditional equipment. The overall failure rate of NBT15 is about 20% lower than that of similar products on the market.
The intelligent battery management system (BMS) of NBT15 can monitor the battery usage status in real time, avoid over-discharge and over-charging, and maximize the battery life.
Versatile Applications
The NBT15 electric tugger has a maximum load capacity of 3,400 pounds (about 1,542 kilograms). In the manufacturing industry, the NBT15 can easily carry heavy items such as large machinery and equipment parts while remaining stable and stable. Even in a relatively small space, it can move flexibly to improve production efficiency.
The NBT15 can accurately carry items in narrow warehouse aisles. By adjusting the speed control system of the equipment, the operator can seamlessly switch between fast handling and delicate operations. For tasks that require large-scale handling in a short period of time, the NBT15 provides flexible speed options with a maximum speed of 5km/h.
The battery capacity of the NBT15 is 32Ah, which enables it to work continuously for a long time and is suitable for all-weather, 24-hour working environments. The NBT15 can provide uninterrupted use for more than 8 hours when working in multiple shifts.
Its maximum slope load capacity is 15%, and the NBT15 can still travel stably on a ground with a certain slope. The low temperature resistance of the lithium battery also enables the equipment to work normally in an environment as low as -10°C.
NBT15 also has high flexibility. During the equipment handling process, you can choose between slow and fast modes to adjust according to the needs of different tasks. For high-precision handling tasks, the operator can use the slow mode to ensure accurate placement of items; for fast transfer tasks, the fast mode can significantly improve efficiency.
In some special application areas, NBT15 can also provide safe and efficient object handling solutions. Its anti-slip and puncture-proof solid rubber tires enable the equipment to adapt to a variety of complex ground. The low noise and low vibration design of the electric drive system allows NBT15 to operate smoothly in places where a quiet and stable environment is required.
Trusted Performance Record
The NBT15 electric tugger has demonstrated reliable performance and excellent durability in actual use. Especially in high-load, high-frequency working environments, it can still operate stably and maintain high work efficiency.
In a large storage center, the NBT15 successfully coped with the task of heavy-duty handling for 12 consecutive hours, with the weight of the transported items up to 3,000 pounds (about 1,360 kilograms). The maximum load capacity of the equipment is 3,400 pounds. Under this load, it can still drive smoothly without any power drop or overheating.
The NBT15's automatic braking system and electronic control system can respond without hesitation in some operations that require quick stops or precise braking. During use, the failure rate of the NBT15 remains at an extremely low level, lower than the industry average of 20%.
The NBT15 shows its high efficiency and low maintenance cost. Under normal use conditions, the NBT15's lithium battery can provide more than 8 hours of use time after each charge, and the charging time is only 3-4 hours. The device's battery energy output remains stable, and the number of battery cycles is significantly higher than the 500 times of other similar products on the market, reaching more than 2,000 times.
The device can work stably in a temperature range of -10°C to 40°C. Its battery and drive system are particularly resistant to low temperatures, ensuring that the device can start quickly and provide strong power in low temperature environments.
The puncture resistance and wear resistance of the solid rubber tire have been repeatedly tested. After 500 hours of use, the tire wear of the NBT15 is only 60% of that of traditional pneumatic tires.
Related Products：
